Éclat 104 Li-on LED 230

Description

The Inverter is a Small but robust Inverter which operates in the Maintained or Non-
Maintained Mode. The current consumption is in the order of 1.30A DC and is suitable for
operation off 2 pieces 3.7V, 1.8Ah, Lithium-ion Cells, offering a Duration of 1.0 Hour,
(Theoretically, 85 minutes,) and is suitable for operating 230V, 07W – 10W LED Lamps and
230V LED Drives. Light Outputs and Emergency Durations are dependent on the Lamp in use.
Any LED Lamp or LED Module rated at 07W will run at 100% Light Output. (See VALID
COMBINATIONS)

ÉCLAT INVERTER STANDARD FEATURES: –
Constant Light Output over entire Emergency Duration, except for the last few minutes – approximately 5
minutes. (Light Output Test Reports are available.)
Mains Presence / Charge Indicating LED.
Supplied Complete with Colour Coded Wires for faster installation.
Robust, Mill Finish Extruded Aluminium Housing.
Low Profile: 31mm x 40mm x 165mm. H x W x L. (104 LI-ON.)
Surface Mount Technology (SMT) Electronic Components.
Glass Fibre Printed Circuit Board (PCB.)
Solder Mask is a Feature on all Inverters, which assists in preventing Short Circuits and resultant Inverter
failure in damp, corrosive or wet environments.
Battery Low Voltage Cut-off Protection.
Battery Over Voltage Charge Protection.
Battery Reverse Polarity Protection.
In the Case of Lithium-ion Battery Packs, the Charger Shuts off, until Battery requires topping up.
Mains Voltage Surge Protection.
Nominal Mains Input Voltage 230V A.C. 50 Hz ± 10%.
Failure Rate of less than 0.05%.
Design Life of 10 Years.