Éclat 212P LED 96.250

Description

The Inverter is a small but robust Unit which operates in the Emergency Maintained Mode.
The current consumption is in the order of 2.55A DC and is suitable for operation off 2
pieces, 6V, 4.5Ah Lead Acid Cells, offering a Duration of 1.5 Hour, (Theoretically, 108
minutes,) and is suitable for operating 96V, 30W – 40W LED Lamps and 96V LED Drives. Light
Output is dependent on the Lamp in use. A 33W Lamp will run at 100% Light Output. (See
VALID COMBINATIONS)
ÉCLAT INVERTER STANDARD FEATURES: –
Constant Light Output over entire Emergency Duration, except for the last few minutes – approximately 5
minutes. (Light Output Test Reports are available.)
Charge Indicating LED.
Supplied Complete with Colour Coded Wires for faster installation.
Robust, Mill Finish Extruded Aluminium Housing.
Low Profile: 31mm x 40mm x 280mm. H x W x L. (212P.)
Surface Mount Technology (SMT) Electronic Components.
Glass Fibre Printed Circuit Board (PCB.)
Solder Mask is a Feature on all Inverters, which assists in preventing Short Circuits and resultant Inverter
failure in damp, corrosive or wet environments.
Battery Low Voltage Cut-off Protection.
Battery Over Voltage Charge Protection.
Battery Reverse Polarity Protection.
In the Case of Lead Acid Batteries, the Charger Shuts off, until Battery requires topping up.
Mains Voltage Surge Protection.
Nominal Mains Input Voltage 230V A.C. 50 Hz ± 10%.
Failure Rate of less than 0.65%.
Design Life of 10 Years.